 |
|
Nationwide
Delivery is
Available!
| Business Hours: (cst) |
| Mon-Thurs |
8am-5pm |
| Friday |
8am-4pm |
| Saturday |
8am-12pm |
|
|
|
|
- Grinds Hay - big round
bales, loose hay, small and large square bales
- Grinds Crop Residues
- straw, stover and other types
- Grinds Grain - corn
(ear or shelled & high moisture), sorghum
- High Capacity in portable
package
- Electronic Governor
- Works with 80 to 175
PTO horsepower tractors and all cereal grains
Call for Pricing and
Finance Options
|
| Features |
 |
18" wide
by 20' long Stacking Conveyor
The product is taken
away from the belly pan augers with a 18" wide
by 20' long high-capacity stacking conveyor. The
conveyor height is hydraulically controlled. Ahefty
hydraulic cylinder transmits its lifting force to
the conveyor through a strong steel linkage system.
It's all controlled by an easy push or pull of a
simple hydraulic lever.
|
 |
10'
Tub at Flare
The "BIG BITE" tub measures 10 feet at the
flare, 8 feet at the base, and has a depth of 44 1/2
inches. |
 |
BIG
BITE Hammermill
The BIG BITE Hammermill is 44-1/2" long, and at
operating speed, the hammers extend out to 26"
in diameter. The 64 swinging hammers are arranged on
eight heavy duty hammer rods. These hammers have four
hardened cutting edges. When the hammer's cutting edge
becomes worn it can be replaced by turning the hammer
to the next available fresh, sharp cutting edge. The
"BIG BITE" hammers can swing up to 180°,
thus limiting how far the hammers can lay back under
tough grinding conditions. |
 |
Tub
Drive
The "BIG BITE" tub is driven by a hydraulic
motor through a heavy-duty roller chain. This drive
method provides for a responsive and smooth transition
of power to the tub. |
 |
Electronic
Governor
The tub rotational speed is controlled by the
Duratech Electronic Governor. This electronic governor
allows the engine speed to remain constant, as the tub
rotation speed varies to control the feed rate to the
hammer mill. |
 |
Eight
Belt Drive System
A dependable Eight Belt Drive System routes power
from the tractor's PTO and supplies it to the mill. This
drive system turns the mill at approximately two times
the tractor's PTO speed. This higher mill speed provides
smooth feedind and delivers high capacity grinding. |
 |
High
Capacity Augers
The two heavy-duty and high capacity augers mounted
in the belly pan convey the product to the discharge conveyor.
The auger and pan combination provides for a high-speed
transfer of the product and for a clean, leak-free environment
under the tub grinder. |
 |
Flexible
Grinding Capabilities
Grinds Hay - big round bales, loose hay, small
and large square bales
Grinds Crop Residues - straw, stover and other types
Grinds Grain - corn (ear or shelled & high moisture),
sorghum, and all cereal grains |
| H-1000
TUB GRINDER SPECIFICATIONS |
| HAMMERMILL |
| Length |
44-1/2" |
| Diameter (with hammers extended) |
26" |
| Feed Opening |
27" x 45" |
| Hammers (hardened swing) |
3/8" |
| Number of Hammers |
64 |
| Rods (case hardened) |
15/16" |
| Mill Plates |
3/16" thick
x 15-3/4" dia. |
| Mill Shaft (stress proof steel) |
3" |
| Drive End Bearing (pillow block) |
2-3/4" |
| Idle End Bearing (pillow block) |
2-7/16" |
| Hammers (hardened swing) |
3/8" |
| Number of Hammers |
64 |
| Rods (case hardened) |
15/16" |
| Mill Plates |
3/16" thick
x 15-3/4" dia. |
| Mill Shaft (stress proof steel) |
3" |
| Drive End Bearing (pillow block) |
2-3/4" |
| Idle End Bearing (pillow block) |
2-7/16" |
| Screens (hole sizes from 1/8" to
4") |
1/4" thick |
| Screen Area |
2,400 sq. in. |
| Drive |
PTO through multiple
V belts |
| Tractor |
PTO Type 1000 RPM
1 3/8", 21 spline shaft |
| Recommended PTO |
80 to 175 horsepower |
| TUB FEATURES
|
| Loading Height |
7' 11" |
| Tub Width at Flare |
10' 3" |
| Depth |
44-1/2" |
| Tub Inside Diameter at Base |
8' |
| Tub Wall Thickness |
14 gauge |
| Tub Floor Thickness |
10 gauge |
| Drive Mechanism |
Electro/Hydrostatic |
| Speed Control |
Electronic Governor |
| Hydraulic Oil Capacity |
12 gal. |
| BELLY PAN
AUGERS |
| Type |
Double Free Floating |
| Auger Size |
9" x 96" |
| Width |
33-3/4" |
| Drive |
Mechanical |
| DISCHARGE
CONVEYOR |
| Type |
Rubber Belt with
Cleats |
| Rollers |
"Easy Clean
Roller" |
| Drive |
Mechanical |
| Length |
20' long |
| Width |
18" |
| Max. Conveyor Lift Height |
13' 9" |
| Conveyor Lift |
Hydraulic |
| Conveyor Lift Cylinder |
3-1/2" x 8" |
| Conveyor Fold |
Sprint Assist Manual |
| OPERATOR
CONTROLS |
| Tub Rotation - 3 position
hydraulic valve for clockwise, stop and counterclockwise |
| Tub Speed - DuraTech model
RCB93 Elecronic Governor sets engine load by controlling
tub rotation speed |
| Conveyor Lift - 3 position
hydraulic valve for raise, hold & lower |
| WEIGHT |
| Total |
6,400 lbs |
| TRANSPORT
DIMENSIONS |
| Width |
10' 3" |
| Length |
21' 4" |
| Height |
10' 2" |
| CHASSIS
FEATURES |
| Towing Arrangement |
Clevis type for
hitch pin |
| Tires |
2) 9.5 x 14 |
| Wheels |
Drop Center Rims |
| Bearings |
Tapered Roller
Bearings |
| OPTIONS |
- Loose Hay Guide
- Grain Grinding Hopper
- Ear Corn Kit
- Geyser Plate
- Mill Grate
- Screen Sizes from 1/8" to 4" Round Hole
- Highway Tires
|
|
|
|
|
|
