| Features |
 |
9' Bale Chamber
The 2800 is equipped
with a 9' bale chamber for processing all round
and square bales.
|
 |
Heavy
Duty Fixed Shredded Chamber with 3 Chain Slat Conveyor
Combining these features with the heavy duty
flails and high speed rotor, the 2800 Heavy Duty Fixed
Shredder Chamber will process bales in any condition
- wet, frozen, old, new, or with flat bottoms. The conveyor
is slanted so it helps feed the hay/straw into the rotor. |
 |
Hydraulically
Adjustable Slug Bars
The hydraulically
adjustable slug bar allows the operator to adjust
the cut, even with a bale in the chamber.
|
 |
Rotor
Access Door
The 2800 is equipped with rotor access doors,
giving you quick and easy access to the rotor for routine
inspections and twine removal. |
 |
Oil
Bath Chain Case and High Speed Rotor
The 2800 features an oil bath chain case with double
60-roller chain that reverses the direction of the PTO
and increases the speed and efficiency of the rotor.
The heavy duty 9' x 26" rotor with 40 3lb flails
processes both dry hay and sileage bales. |
| |
|
| 2800
Balebuster SPECIFICATIONS |
| WEIGHT |
| Total |
7,300
lbs |
| Tongue (Bale loader fully raised) |
2,550 lbs |
| Tongue (Bale loader down) |
2,150 lbs |
| TRANSPORT
DIMENSIONS (Bale loader fully raised, deflector
folded) |
| Width |
101" |
| Length |
211" |
| Height |
102" |
| WORKING
DIMENSIONS (with 1 bale, deflector in spread
position) |
| Width |
130" |
| Length |
290" |
| Height |
102" |
| WORKING
DIMENSIONS (with 2 bales, deflector in spread
position) |
| Width |
130" |
| Length |
329" |
| Height |
120" |
| CHASSIS
FEATURES |
| Towing Arrangement |
Clevis type hitch |
| Jack Capacity |
5,000 lbs |
| Jack Travel |
10" |
| Tires |
2) 16.5 x 16.1
- 10 ply |
| Wheels |
2) 16.1 x 12 -
8 bolt drop center |
| Bearings |
Tapered Roller |
| BALE
LOADER (with position indicator) |
| Type |
Twin Boom Arms with Squeeze Arms for
square bales |
| Bale Tines |
Tubular Steel,
10E Float, 4 position width adjustment |
| BALE
CONVEYOR |
| Type |
3 Roller Chains
with Bolt-on Cross Slat |
| Drive |
Hydraulic Orbital Motor with Adjustable
Flow Control |
| CHAIN
CASE |
| Sealed Oil Lube Chain Case
- Reverses rotation and increases rotor speed. Double
60 Roller Chain |
| BALE
SHREDDER CHAMBER |
| Max Bale Size - Round |
6' long x 6-1/2'
diameter |
| Max Bale Size - Square |
52" x 52"
x 8' |
| Max Bale Weight |
2,200 lbs each |
| Rotor Length |
108" |
| Rotor Diameter (flails extended) |
26" |
| Rotor Bearing |
Ball, 1-3/4" |
| Number of Flails |
40 |
| Flail Type |
Heavy Duty, 7/16" thick, 3lb
Heat Treated Spring Steel, Swinging |
| Stripper Channels |
Optional |
| Number of Slug Bars |
7 |
| Slug Bar Type |
Single Point, 5 adjustment settings |
| Delivery |
Right Hand Discharge |
| Deflector |
Split, Hydraulic with infinite settings
through a 120E range |
| Max. Horizontal Spread |
Straw, up to 50' |
| OPERATOR
CONTROLS |
| Loader, Conveyor, Deflector
and Squeeze Loader - 1 remote with electric over hydraulic,
finger tip controls |
| Bale Conveyor Speed - Conveyor
Speed Control Valve |
| Slug Bar - Hand lever with
5 settings and optional hydraulic adjustment |
| Deflector - Hydraulic with
Split Deflector (can be offset)
|
| REQUIREMENTS
FOR OPERATION - TRACTOR |
| PTO Horsepower Required |
90 to 155 |
| PTO Type |
1000 RPM, 1-3/8"
dia PTO shaft w/ 21 splines |
| Min. Tractor Hydraulic Output |
8 gpm at 1500 psi |
| Tractor Hydraulic Controls |
1 double-acting control valve with quick
coupler outlets |
| Tractor Weight |
Must be of equal or greater weight than
that of a 2800 with 2 bales |
